LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1990 >> Metro Base, 4D Hatchback, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Controls - Specifications >> Throttle Position Switch - M/T
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Throttle Position Switch - M/T

THROTTLE POSITION SWITCH RESISTANCE - M/T

Application Condition Resistance (Ohms)
Between Terminals A-B (1) Continuity
Between Terminals B-C (1) No Continuity
Between Terminals A-C (1) No Continuity
Between Terminals A-B (2) No Continuity
Between Terminals B-C (2) No Continuity
Between Terminals A-C (2) No Continuity
Between Terminals A-B (3) No Continuity
Between Terminals B-C (3) Continuity
Between Terminals A-C (3) No Continuity
(1) With .012" (.30 mm) feeler gauge installed between stop screw and lever.
(2) With .035" (.89 mm) feeler gauge installed between stop screw and lever.
(3) With throttle valve fully opened.
Fig 1: Identifying Throttle Position Switch Terminals (M/T Only)
G121567Courtesy of GENERAL MOTORS CORP.