LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1992 >> Prizm LSi, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Engine Sensors & Switches >> Throttle Position Sensor (PRIZM GSI)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Throttle Position Sensor (PRIZM GSI)

Disconnect TPS electrical connection. Install proper thickness feeler gauge between stop screw and lever. Using ohmmeter, check continuity or resistance between designated terminals. Adjust or replace TPS if not within specification. See THROTTLE POSITION SENSOR (TPS) RESISTANCE  .

THROTTLE POSITION SENSOR (TPS) RESISTANCE (PRIZM GSi)

Application Condition Ohms
Between Terminals E2 & IDL (1)(2) Continuity
Between Terminals E2 & IDL (2)(3) No Continuity
(1) With .014" (.35 mm) feeler gauge installed between stop screw and lever.
(2) Terminal E2 is the top terminal (Brown wire) terminal. IDL terminal is second terminal (Blue wire) from the top of TPS.
(3) With .023" (.58 mm) feeler gauge installed between stop screw and lever.
scientia non olet · About LEMON Manuals