October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Toe-In Adjustment: Rear
- Adjust rear wheel toe-in by rotating control rod inside bolt (cam bolt). See Fig 1
. Loosen right and left control rod inside nuts. Turn right and left control rod inside bolts same amount to set toe-in to specification. See ALIGNMENT SPECIFICATIONS
table.
- After adjustment, tighten right and left control rod inside nuts to specification while holding control rod inside bolts. See TORQUE SPECIFICATIONS
.
Courtesy of GENERAL MOTORS CORP.