LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1993 >> Prizm Base, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Adjustments >> Toe-In Adjustment >> Front
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Toe-In Adjustment: Front

  1. Adjust front wheel toe-in by changing tie rod length. Loosen rack boot clamps (small end), and slide clamps from boot. Loosen right and left tie rod end lock nuts.
  2. Turn right and left tie rods same amount to adjust toe-in to specification. See ALIGNMENT SPECIFICATIONS  table. Tighten tie rod end nuts to specification. See TORQUE SPECIFICATIONS  . Dimension "A" should be the same on left and right tie rods.

See Fig 1 .

Fig 1: Adjusting Front Toe-In (Typical)
G91G01998Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals