LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1993 >> Tracker Base, 4WD, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Throttle Position (TP) Sensor >> Removal & Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal & Installation

  1. With ignition off, remove air cleaner assembly (if necessary). Disconnect TP sensor harness connector, and remove mounting screws.
  2. To install, mount TP sensor to throttle body with alignment slots slightly counterclockwise of body holes. Turn TP sensor clockwise to align holes and install mounting screws finger tight. Adjust TP sensor. See THROTTLE POSITION (TP) SENSOR in ADJUSTMENTS article in this section.
scientia non olet · About LEMON Manuals