LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1995 >> Metro Base, 2D Hatchback >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 1.3L 4-CYL >> Fuel System >> Throttle Position (TP) Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Disconnect negative battery cable. Disconnect PCV hose and Intake Air Temperature (IAT) sensor electrical connector. Remove air cleaner assembly. Disconnect TP sensor harness connector. Remove mounting screws and TP sensor.
  2. To install, mount throttle position sensor to throttle body with alignment slots slightly counterclockwise of body holes. Turn throttle position sensor clockwise to align holes and install mounting screws finger tight. To complete installation, reverse removal procedure. Adjust TP sensor. See THROTTLE POSITION (TP) SENSOR in ADJUSTMENTS - 1.3L 4-CYL article.
scientia non olet · About LEMON Manuals