LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1996 >> Metro Base, 2D Hatchback, 1.3 9 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests 1.0 & 1.3L >> Miscellaneous Controls >> Transmission Controls >> Shift Indicator Light (With M/T)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shift Indicator Light (With M/T)

  1. Turn ignition on, and note shift indicator light. If shift indicator light illuminates, go to next step. If shift indicator light does not illuminate, go to step 3).
  2. Turn ignition off. Disconnect electrical connector from PCM. Connect a jumper between PCM connector C1, terminal No. 18 (Purple/Red wire) and ground. Turn ignition on, and note shift indicator light. If shift indicator light illuminates, go to next step. If shift indicator light does not illuminate, check for poor connection at PCM. If connection is okay, replace PCM.
  3. Connect a fused jumper wire between instrument cluster connector terminal No. 3 (Light Blue wire) and ground. If shift indicator light illuminates, repair open in Light Blue wire or Purple/Red wire. If shift indicator light does not illuminate, check for open in Black/White wire between instrument cluster and 15-amp IG fuse located in junction block. Check for poor connection at instrument cluster connector. Check for open in instrument panel printed circuit. Also check for faulty indicator bulb. Repair or replace as necessary.
scientia non olet · About LEMON Manuals