Scan Tool Data
NOTE:
Information contained in the following tables is typical of readings taken on a vehicle with engine idling at normal operating temperature, throttle closed, transmission in Park or Neutral, system in closed loop status, and all accessories off (except as noted in tables). For additional information, see scan tool owner's manual.
SCAN TOOL DATA VALUES
| Scan Tool Parameters |
Typical Data Value |
| ECT |
185-203°F (85-95°C) |
| IAT |
80°F (10°C) |
| Desired Idle Speed |
850 RPM |
| Closed Throttle Switch |
ON |
| IAC Flow Duty |
20-40% |
| Engine Speed |
|
| Short Term FT |
-20 - +20% |
| Long Term FT |
-15 - +15% |
| Spark |
-1° - -18° |
| Battery+ Voltage |
10-14 Volts |
| MAF |
Not Available |
| Fuel Inj. PWM |
0.8-2.3 mS |
| Throttle Position Angle |
7-18% |
| Throttle Position Sensor |
.42-1.15 Volts |
| HO2S1 |
50-950mV |
| HO2S2 |
0-950mV |
| Loop Status |
Closed |
| Engine Load |
3-5% |
| Total Fuel Trim |
-35 - +35% |
| Fuel Cut Signal |
OFF |
| EVAP Purge Flow Duty |
0-100% |
| Fuel Tank Pressure |
0 kPa (0 mm Hg) |
| EGR Solenoid Vacuum Valve |
OFF |
| EGR Bypass Solenoid |
OFF |
| MAP |
29-47 kPa/1.32 (1.90 Volts) |
| Vehicle Speed |
0 MPH (0 KM/H) |
| Electrical Load Signal |
OFF |
| Engine Cooling Fan |
ON/OFF |
| Power Steering Switch |
ON/OFF |
| Air Conditioning |
OFF |
| EVAP Canister Purge Solenoid |
ON/OFF |
| Fuel Tank Pressure Solenoid |
ON/OFF |
| Fuel Tank Level |
Varies |
| Gear Position |
"P" Or "N", "D", "2", "1" |