LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1996 >> Metro Base, 4D Sedan, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul 1.0 & 1.3L >> Ignition System >> Camshaft Position (CMP) Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

Remove distributor cap and rotor. Remove CMP sensor cover. Remove 2 CMP sensor screws and remove (CMP) sensor from distributor. To install, reverse removal procedure. Rotate signal rotor and align a signal rotor ridge to CMP sensor. Adjust air gap to .008-.016" (.20-.41 mm) and tighten CMP sensor mounting screws. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals