LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1996 >> Metro Base, 4D Sedan, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul 1.0 & 1.3L >> Ignition System >> Distributor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Disconnect negative battery cable. Remove distributor cap. See Figure. Mark distributor-to-engine position and distributor rotor-to-distributor housing position for installation reference. Unplug distributor harness connector and remove 2 hold-down bolts. Remove distributor.
  2. DO NOT rotate crankshaft with distributor removed, or reference marks will be incorrect. To install distributor, use reference marks and reverse removal procedure. Install mounting bolts. DO NOT tighten mounting bolts fully until timing is reset. See TORQUE SPECIFICATIONS.
scientia non olet · About LEMON Manuals