LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1996 >> Prizm Base, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul 1.6 & 1.8L >> Ignition System >> Crankshaft Position (CKP) Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

Disconnect negative battery cable. Unplug CKP sensor connector. Remove one bolt and CKP sensor from right side of engine block, behind crank pulley. To install, reverse removal procedure. Tighten CKP mounting bolt to 82 INCH lbs. (9.3 N.m.).

scientia non olet · About LEMON Manuals