Starter Specifications
STARTER SPECIFICATIONS
| Application | Specification | ||
|---|---|---|---|
| Brush Length | .47-.69" (12-18 mm) | ||
| Commutator Insulation Depth | |||
| Minimum Depth | .008" (.2 mm) | ||
| Standard Depth | .020-.031" (.5-.8 mm) | ||
| Commutator Outside Diameter | 1.134-1.157" (28.8-29.4 mm) | ||
| Commutator Runout | .002-.016" (.05-.41 mm) | ||
| Starter Current Draw | |||
| No-Load | |||
| A/T | 90 Amps At 11.0 Volts | ||
| M/T | 50 Amps At 11.0 Volts | ||
| Load | |||
| A/T (92.0 INCH Lbs. Torque) | 300 Amps At 7.7 Volts | ||
| M/T (80.5 INCH Lbs. Torque) | 300 Amps At 7.7 Volts | ||
| Locked Rotor | |||
| A/T (18.8 Ft. Lbs. Torque) | 980 Amps At 4.0 Volts | ||
| M/T (13.8 Ft. Lbs. Torque) | 780 Amps At 4.0 Volts | ||