LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1997 >> Prizm Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul 1.6 & 1.8L >> Fuel System >> Throttle Position (TP) Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Disconnect negative battery cable. Disconnect TP sensor harness connector. Remove mounting screws and TP sensor.
  2. To install, mount TP sensor on throttle body with alignment slots slightly counterclockwise of body holes. Turn TP sensor clockwise to align holes and install mounting screws finger tight. To complete installation, reverse removal procedure. Adjust TP sensor. See THROTTLE POSITION (TP) SENSOR in the ADJUSTMENTS article. Tighten TP sensor mounting screws.
scientia non olet · About LEMON Manuals