Repair and Diagnosis: Maintenance: Procedures: HONDA: HONDA: Adjustment: Toe-In: Rear

To adjust toe-in, loosen lock nuts on radius arm adjusting bolts. Rotate adjusting bolt until toe is within specifications, then tighten lock nuts.
On Accord models, each notch on cam plate is equal to 0.20" (5 mm). On Civic models, each notch on cam plate is equal to 0.63" (16 mm). On Prelude models, each notch on cam plate is equal to 0.60" (15 mm).
NOTE: Notches on cam plate are for reference only. Do not use notches to equalize adjustments on rear radius rods.