LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 1985 >> Civic DX, Automatic >> Repair and Diagnosis (Single Page) >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Riding Height Specifications >> Toe-In >> Rear
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Riding Height Specifications: Toe-In: Rear

  1. Release emergency brake. Loosen lock nuts while holding adjusting bolts on radius arm. Rotate adjusting bolt to meet specifications. Tighten lock nuts.
  2. On Accord models, each notch on cam plate is equal to .20" (5 mm). On Civic, CRX and Prelude models, measurements for cam plate not available.
NOTE: Notches on cam plate are for reference only. Do not use notches to equalize adjustments on rear radius rods.
scientia non olet · About LEMON Manuals