LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 1993 >> Prelude VTEC >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock >> Testing >> Speed Sensor Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Speed Sensor Test

  1. Turn ignition off, and connect ABS Tester (07HAJ-SG0010A or 07HAJ-SG0010B) to Orange 6-pin test connector, located under passenger's seat. Turn ignition on. Place ABS tester mode selector to "0" position.
  2. Raise and support vehicle so wheels can be turned. Place transmission in Neutral. Turn wheels by hand at one revolution per second. Appropriate monitor light should blink each time wheel is rotated.
  3. In some instances, front wheels may not rotate fast enough to make tester light blink. If this happens, start engine. Slowly accelerate and decelerate front wheels. If light does not blink, check appropriate speed sensor, sensor air gap and wiring.
scientia non olet · About LEMON Manuals