LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 1995 >> Passport DX >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing - 2.6L >> Ignition Checks >> Non-HEI Systems >> Ignition Coil
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil

  1. Ensure ignition is off. Disconnect ignition coil wiring. Measure primary resistance between terminals "C" and "E". See Fig 1 . Measure secondary resistance between terminals "C" and "D". Measure insulation resistance between terminals "C" and body ground.
  2. Make sure resistance is within specification. Refer to IGNITION COIL RESISTANCE (NON-HEI SYSTEMS)  . Replace coil if resistance is not within specification.
    IGNITION COIL RESISTANCE (NON-HEI SYSTEMS)

    Application (1) Primary Ohms @ 68°F (20°C) Secondary Ohms @ 68°F (20°C)
    2.6L .81-.99 7500-11,300
    (1) Insulation resistance should not be more than 10 megohms.
    Fig 1: Identifying Ignition Coil Terminals
    G95G31084Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals