LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2000 >> Odyssey EX >> Repair and Diagnosis >> Engine Performance >> System >> Fuel & Emissions Systems >> How to Set Readiness Codes >> EGR Monitor and Readiness Code >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EGR Monitor and Readiness Code: Procedure

  1. Connect the scan tool to the vehicle's data link connector (DLC), and bring up the tool's generic OBD II mode.
  2. Start the engine
  3. Drive at a steady speed with the transmission in D position, 50 62 mph (80-100 km/h) or above for more than 10 seconds.
  4. With the transmission in D position, decelerate from 62 mph (100 km/h) or above by completely releasing the throttle for at least 5 seconds If the engine is stopped during this procedure, go to step  3 and do the procedure again.
  5. If the readiness code is still set to incomplete, check for a temporary DTC If there is no DTC, the enable criteria was probably not met, repeat the procedure.
scientia non olet · About LEMON Manuals