Brake System (Complete): Remove, Install, and Overhaul

Includes: Overhaul Calipers and/or Wheel Cylinders. Replace Brake Shoes and/or Pads. Clean, lube and/or replace Brake Hardware as necessary. Inspect Master Cylinder, all Hoses and bleed Brake System. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
All Wheels,w/Rear Disc Brakes		3.4		B
Combination Procedure: AXLE OR WHEEL BEARING: Replace:
RWD, Front	Refer to Front Wheel Bearing - R&R.			B
Front	Refer to Front Wheel Bearing - R&R.			B
Combination Procedure: AXLE OR WHEEL SEAL: Replace:
Front	Refer to Front Wheel Bearing - R&R.			B
Combination Procedure: DISC ROTOR: Remove and Install for Refinishing:
		0.7		B
Combination Procedure: DISC ROTOR: Replace:
Front,Each		0.4		B