APP Sensor Replacement

WARNING: This page is about a different car, the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, and 2006 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.

Remove the throttle cable cover (see THROTTLE CABLE ADJUSTMENT ).
Remove the throttle cable (see THROTTLE CABLE REMOVAL/INSTALLATION ).
Disconnect the accelerator pedal position (APP) sensor 6P connector (A).

Fig 1: Disconnecting Accelerator Pedal Position (APP) Sensor 6P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the bolts (B), and the APP sensor (C).
Install the sensor in the reverse order of removal.