Air Mix Control Motor Replacement

WARNING: This page is about a different car, the 2009 Honda S2000 and 2008 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.

Remove the audio unit. See AUDIO UNIT REMOVAL/INSTALLATION .
Remove the passenger's dashboard lower cover. SeePASSENGER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION .
Disconnect the 7P connector (A) from the air mix control motor (B). Remove the self-tapping screws and the air mix control motor from the heater unit.

Fig 1: Identifying 7P Connector And Air Mix Control Motor
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make sure the motor runs smoothly.