Intermittent Wiper Control Circuit Input Test: S2000

1. Remove gauge assembly. See GAUGE ASSEMBLY  under REMOVAL & INSTALLATION. Inspect all gauge assembly connector terminals for damage or corrosion. Repair as necessary and retest system. If connector and terminals are okay, go to next step.
2. Using DVOM, perform control unit input tests. See Fig 1. If an input test indicates a problem, find and correct cause and retest system. If all input test results are okay, replace gauge assembly.

Fig 1: Intermittent Wiper Control Input Test (S2000)

Courtesy of AMERICAN HONDA MOTOR CO., INC.