LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2002 >> Insight Automatic CVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Power Windows) >> Driver's Window Motor Test >> '99-02 models >> Motor Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Motor Test

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Honda Odyssey, 2003 Honda Odyssey, 2002 Honda Odyssey, 2001 Honda Odyssey, and 2000 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
  2. Disconnect the 4P connector from the window motor.
    Fig 1: Disconnecting 4P Connector From Window Motor
    G01558117Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Test the motor in each direction by connecting battery power and ground according to the table. When the motor stops running, disconnect one lead immediately.
    Fig 2: Testing Motor In Each Direction By Connecting Battery Power & Ground Table
    G01558118Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. If the motor does not run or fails to run smoothly, replace it.
    1. Pulser Test 
  5. Connect the test leads of an analog ohmmeter to the No. 3 and No. 4 terminals.
  6. Run the motor by connecting power and ground to the No. 1 and No. 2 terminals. The ohmmeter needle should move back and forth alternately.
  7. If the test is not as specified, replace the driver's window motor.
scientia non olet · About LEMON Manuals