LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2002 >> Insight Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Multiplex Integrated Control System) >> DTC Troubleshooting >> DTC B2000: Communication Bus Line Error
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC B2000: Communication Bus Line Error

WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A  ).
  1. Clear the DTCs with the HDS.
  2. Turn the ignition switch OFF, and then back ON (II).
  3. Wait for 6 seconds or more.
  4. Check for DTCs with the HDS.

    Is DTC B2000 indicated? 

    1. YES  - Go to step 5.
    2. NO  - Intermittent failure, the system is OK at this time. Check for loose or poor connections at the left power sliding door control unit connector A (22P), at the MICU-rear junction box connectors A (14P) and G (8P), and at driver's under-dash fuse/relay box connector G (6P).
  5. Check for DTCs with the HDS.

    Is DTC B1000 also indicated? 

    1. YES  - Troubleshoot DTC B1000.
    2. NO  - If only B2000 is indicated, replace the left power sliding door control unit.
scientia non olet · About LEMON Manuals