LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2003 >> S2000 >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (VSA (Vehicle Stability Assist) System Components) >> Steering Angle Sensor Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Angle Sensor Replacement

WARNING: This page is about a different car, the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, and 2006 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Do not damage or drop the combination switch as the steering angle sensor is sensitive to shock and vibration.
  1. With the wheels in the straight-ahead position and the steering wheel centered, remove the steering wheel (see STEERING WHEEL REMOVAL ).
  2. Remove the steering column covers (see STEERING COLUMN REMOVAL AND INSTALLATION ) and the cable reel (see REMOVAL ('06-09 MODELS) ).
  3. Remove the combination switch assembly (see STEERING COLUMN REMOVAL AND INSTALLATION ).
  4. Remove the combination light switch (A) and the wiper/washer switch (B) from the combination switch body assembly (C).
    Fig 1: Identifying Combination Light Switch, Wiper/Washer Switch And Combination Switch Body Assembly
    G06232198Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the combination switch body assembly in the reverse order of removal.
    NOTE:
    • Do not remove the steering angle sensor from the combination switch body.
    • When installing the cable reel, set the turn signal canceling sleeve position so that the arrow points straight up (see INSTALLATION ('06-09 MODELS) ).
  6. Do the VSA sensor neutral position memorization (see SENSOR CLUSTER REPLACEMENT ).
scientia non olet · About LEMON Manuals