Passenger's Window Switch Test/Replacement

Carefully pry off the door switch trim (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
Disconnect the 6P connector (A) from the power window switch (B), then remove the three mounting screws and the power window switch from the switch trim (C).

Fig 1: Removing Front Passenger's Window Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Removing Rear Passenger's Window Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Swap the window switch with another known-good switch and test. If the original window switch is faulty, replace it.