LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2005 >> CR-V EX, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Intake Air System >> IMT Valve Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

IMT Valve Replacement

  1. Remove the intake manifold (see INTAKE MANIFOLD REMOVAL AND INSTALLATION ).
  2. Disconnect the vacuum hose (A).
    Fig 1: Installing The IMT Actuator With Torque Specifications
    G03674310Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the bolts (B).
  4. Remove the IMT actuator assembly (C).
    NOTE:
    • When installing the IMT actuator, make sure the bearing (D) is in place.
    • Make sure the IMT assembly does not interfere with the intake manifold (E).
    • When installing the IMT actuator, replace the O-rings (F).
  5. Install the IMT actuator assembly (A) so the hole (B) is visible.
    Fig 2: Installing IMT Actuator Assembly So Hole Is Visible
    G03674311Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Turn the IMT actuator assembly (A), and align the bolt holes.
    NOTE: When turning the IMT actuator assembly, make sure the stop (B) fits into the groove (C).
    Fig 3: Turning IMT Actuator Assembly, And Aligning Bolt Holes
    G03674312Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals