LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2006 >> Civic Si >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Cruise Control Systems) >> Clutch Pedal Position Switch Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Clutch Pedal Position Switch Test

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, 2006 Honda S2000, and 2005 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the connector from the clutch pedal position switch, then remove the switch.
    Fig 1: Disconnecting Connector From Clutch Pedal Position Switch
    G03692211Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Check for continuity between the clutch pedal position switch connector terminals. There should be no continuity between the terminals with the button (A) released, and there should be continuity with the button pressed.
    Fig 2: Identifying Clutch Pedal Position Switch Connector Terminals
    G03692212Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. If the clutch pedal position switch is faulty, replace it.
  4. Install the clutch pedal position switch, and adjust it (see CLUTCH PEDAL, CLUTCH PEDAL POSITION SWITCH, AND CLUTCH INTERLOCK SWITCH ADJUSTMENT ).
scientia non olet · About LEMON Manuals