DTC P15A0 (32): Motor Drive Module (MDM) Temperature Signal Circuit Low Input: General Description
If the MCM (motor control module) control input voltage from the MPI (motor power inverter) module temperature sensor is below the lower limit of a set range, a short to ground in the sensor signals or a malfunction in the MCM input circuit is detected and a DTC is stored.
MONITOR DESCRIPTION CHART
| Execution | Continuous |
| Sequence | None |
| Duration | 2 seconds or more |
| DTC Type | One drive cycle, MIL ON, IMA system indicator ON |
ENABLE CONDITIONS CHART
| Condition | Minimum | Maximum |
|---|---|---|
| BCM power-supply voltage | 10.5 V | - |
| No active DTCs | MPI | |