Transmission Range Switch Harness Connector

WARNING: This page is about a different variant/trim than selected.

Fig 1: Connector Terminal Signal Chart

Courtesy of AMERICAN HONDA MOTOR CO., INC.

3. Transmission range switch test is completed if the test results are OK, go to step 10. If there is no continuity between any terminals, go to step 4.
4. Remove the transmission range switch cover (A).

Fig 2: Identifying Transmission Range Switch Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
5. Disconnect the transmission range switch connector (A).

Fig 3: Identifying Transmission Range Switch Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
6. Check for continuity between the terminals at the transmission range switch connector. There should be continuity between the terminals in the following table for each transmission range switch position.