September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Immobilizer Control Unit-Receiver Replacement
- Remove the driver's dashboard lower cover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION
).
- Remove the steering column covers (see STEERING COLUMN REMOVAL AND INSTALLATION
).
- Disconnect the 7P connector (A) from the immobilizer control unit-receiver (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove the two screws and the immobilizer control unit-receiver from the ignition key cylinder
- Install the immobilizer control unit-receiver in the reverse order of removal.
- After replacement, rewrite the unit with the HDS, then check the immobilizer system.
NOTE:
You must have all of the customer's keys.