LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2008 >> Odyssey EX >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Active Control Engine Mount (ACM) System >> Engine Mount Control Unit Replacement >> '07 model J35A7 engine
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

'07 model J35A7 engine

  1. Remove the lower glove box (see LOWER GLOVE BOX REMOVAL/INSTALLATION ), and the right kick panel (see step 2 on TRIM REMOVAL/INSTALLATION - DOOR AREAS ).
  2. Disconnect the engine mount control unit, 20P connector (A).
    Fig 1: Identifying 20P Connector And Engine Mount Control Unit
    G05522797Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the engine mount control unit (B).
  4. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals