LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2009 >> Element SC, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Navigation System >> System Description >> Audio-Navigation Unit Inputs and Outputs >> Rearview Camera Inputs and Outputs
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rearview Camera Inputs and Outputs

Fig 1: Identifying Rearview Camera 12P Connector Terminal Identification
G08049622Courtesy of AMERICAN HONDA MOTOR CO., INC.
REARVIEW CAMERA 12P CONNECTOR

Terminal Number Wire Color Terminal Name Description Voltage (about) Symptom
7 BLU CAMERA VCC (VCC supply) Power source for rearview camera 8V If open: No rearview camera image.
If short to ground: When put into reverse, the navigation screen goes black (display backlight still operative).
8 PNK VCC GND (Ground) Ground for rearview camera 0 V If open: No change to rearview camera image.
If short to ground No change to rearview camera image.
9 RED CAMERA GND (Ground camera) Ground for camera signal 0 V If open: No change to rearview camera image.
If short to ground: No change to rearview camera image.
10 BLK CAMERA V (Video camera) Video signal for rearview camera 0.3 V If open: No change to rearview camera image.
If short to ground: No change to rearview camera image.
11 GRV (1) CAMERA SH (Shield camera) Shield for terminals No. 7 to No. 10 0 V If open: No change to rearview camera image
If short to ground: No change to rearview camera image
12 BRN CAMERA ADPT (Adaptive camera) Control signal for rearview camera 0 V If open: No change to rearview camera image.
If short to ground No change to rearview camera image
(1) The shielded wires have a heat-shrunk tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.
scientia non olet · About LEMON Manuals