ECM/PCM Inputs and Outputs at Connector D (17P)
NOTE:
Standard battery voltage is about 12 V.
ECM/PCM CONNECTOR D REFERENCE TABLE
| Terminal number | Wire color | Terminal name | Description | Signal | ||||
|---|---|---|---|---|---|---|---|---|
| 3(1) | GRN | D3SW (D3 SWITCH) | Detects D3 switch signal | With ignition switch ON (II), D3 switch pushed: about 0 V With ignition switch ON (II), D3 switch released: battery voltage |
||||
| 5(1) | WHT | ATPR (TRANSMISSION RANGE SWITCH R POSITION) | Detects transmission range switch R position signal | In R position: about 0 V In any position other than R position: battery voltage |
||||
| 6(1) | BLK/BLU | ATPP (TRANSMISSION RANGE SWITCH P POSITION) | Detects transmission range switch P position signal | In P position: about 0 V In any position other than P position: battery voltage |
||||
| 8 | BLU | BKSWNC (BRAKE PEDAL POSITION SWITCH) | Detects brake pedal position switch signal | With ignition switch ON (II), brake pedal released: battery voltage With ignition switch ON (II), brake pedal pressed: about 0 V |
||||
| 9(2) | YEL/GRN | CCCLSW (CRUISE CONTROL CLUTCH SWITCH) | Detects cruise clutch pedal position switch signal | With ignition switch ON (II) and clutch pedal released: about 0 V With ignition switch ON (II) and clutch pedal pressed: battery voltage |
||||
| 15 | BRN | ETCSRLY (THROTTLE ACTUATOR CONTROL MODULE RELAY) | Drives throttle actuator control module relay | With ignition switch ON (II): about 0 V | ||||
|
||||||||