LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2009 >> Element SC, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Fuel And Emissions System (V6)) >> How to Set Readiness Codes >> EGR Monitor and Readiness Code >> Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

EGR Monitor and Readiness Code: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Honda Crosstour, 2014 Honda Crosstour, 2013 Honda Crosstour, 2012 Honda Crosstour, and 2011 Honda Accord Crosstour. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the HDS to the DLC.
  2. Start the engine.
  3. Drive at a steady speed with the transmission in D, at 51-62 mph (80-100 km/h) or above, for more than 10 seconds.
  4. With the transmission in D, decelerate from 62 mph (100 km/h) or above by completely releasing the throttle for at least 5 seconds. If the engine is stopped during this step, repeat steps  3 and 4.
  5. Check the OBD status screen for DTC P0401 in the DTCs MENU with the HDS.
    • If it is passed, readiness is complete.
    • If it is not passed, go to step  3 and retest.
scientia non olet · About LEMON Manuals