Traction Control Switch: Testing and Inspection

VSA OFF Switch Test

1. Turn the ignition switch to LOCK (0).

2. Remove the instrument panel. Instrument Panel Removal/Installation

3. Remove the VSA OFF switch (A) by pushing from the back side of the instrument panel.






4. Check for continuity between VSA OFF switch 6P connector terminals No. 1 and No. 6. There should be continuity when the button is pressed, and no continuity when the button is released.






5. Check for continuity between VSA OFF switch 6P connector terminals No. 2 and No. 3. There should be continuity at all times.

6. Install the VSA OFF switch in the reverse order of removal.