Starter Removal and Installation: Installation

Install the starter, then tighten the two bolts

Fig 1: Starter Bolts With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the harness clamp (A).

Fig 2: Starter Bolts With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Connect the positive starter cable (B) and the S terminal connector (C). Make sure the crimped side of the ring terminal faces away from the starter when you connect it.
Install the intake manifold (see INSTALLATION ).
Do the battery installation procedure (see INSTALLATION ).
Start the engine to make sure the starter works properly.