LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2011 >> Fit Base, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Audio System >> System Description >> USB Adapter Connector for Inputs and Outputs >> USB Adapter Unit Connector A (14P)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

USB Adapter Unit Connector A (14P)

Fig 1: Identifying USB Adapter Unit Connector A (14P)
G06768795Courtesy of AMERICAN HONDA MOTOR CO., INC.
CONNECTOR PINOUTS DESCRIPTION CHARTCONNECTOR PINOUTS DESCRIPTION CHARTCONNECTOR PINOUTS DESCRIPTION CHART

Cavity Wire Connects to
A1 ORN Audio unit or Audio-navigation unit (+B)
A2 BLU Audio unit or Audio-navigation unit (SYS ACC)
A3 GRY(1) Shield for terminals No. 9 and No. 10 (GA-NET BUS SH)
A4 PNK(1) Shield for terminals No. 5, No. 6, No. 13, and No. 14 (GA-NET AUDIO SH)
A5 BLK(2)
BRN(3)		 Audio unit or Audio-navigation unit (AUDIO R+)
A6 WHT Audio unit or Audio-navigation unit (AUDIO L+)
A9 YEL Audio unit or Audio-navigation unit (GA-NET BUS+)
A10 GRN Audio unit or Audio-navigation unit (GA-NET BUS-)
A11 PNK(2) BLK(3) Audio unit or Audio-navigation unit (GND)
A13 RED Audio unit or Audio-navigation unit (AUDIO R-)
A14 GRN(2) LT BLU(3) Audio unit or Audio-navigation unit (AUDIO L-)
(1) The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.
(2) With navigation
(3) Without navigation
scientia non olet · About LEMON Manuals