Diagnostic Test: System Links
NOTE:
- Check the vehicle battery condition first (see 12 VOLT BATTERY TEST ).
- Verify that the correct audio-navigation unit is installed for this model. Go into the System Diagnostic Mode, and use Version (see VERSION ).
- Check the connectors for poor connections or loose terminals.
- Before troubleshooting, make sure you have the anti-theft code for the audio-navigation unit.
- After troubleshooting, enter the anti-theft code for the audio-navigation unit.
- Make sure that the correct navigation DVD color and version are installed.
- Inspect the navigation DVD for dirt or damage.
- Check any official Honda service website for more information about the navigation system.
- Turn the ignition switch to ON (II).
- Make sure the anti-theft code for the audio-navigation unit is entered.
- Go into the System Diagnostic Mode, and select the Self-Diagnosis Mode (see SYSTEM DIAGNOSTIC MODE ).
- Check the System Links (see SYSTEM DIAGNOSTIC MODE
).
Is the Radio icon red?
YES -Do the troubleshooting for the voice guidance cannot be heard, is broken up, or there static (see VOICE GUIDANCE CANNOT BE HEARD, IS BROKEN UP, OR THERE IS STATIC ).
NO -Go to step 5.
- Substitute a known-good audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION
), and recheck.NOTE:
- Eject all the discs before removing the audio-navigation unit to prevent damaging the CD player's load mechanism.
- Remove the PC card before removing the audio-navigation unit.
Can the navigation system control the audio system?
YES -Replace the audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION ).
NO -Do the audio system troubleshooting.