LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2012 >> Fit Base, Automatic Trans >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission >> A/T Differential >> Backlash Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Backlash Inspection

  1. Install the driveshaft and intermediate shaft into the differential assembly, and place the axles on V-blocks (A).
    Fig 1: Installing Driveshaft And Intermediate Shaft Into Differential Assembly
    G06768764Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Measure the backlash of the pinion gears (B) with a dial indicator (C).

    Standard: 0.05-0.15 mm (0.002-0.006 in) 

  3. If the backlash is out of standard, replace the differential carrier (see CARRIER BEARING REPLACEMENT ).
scientia non olet · About LEMON Manuals