HFL Switch Test

SRS components are located in this area. Review the SRS component location COMPONENT LOCATION INDEX , and the precautions and procedures PRECAUTIONS AND PROCEDURES in the SRS article before doing repairs or service.

1. Remove the HFL switch (see HFL SWITCH REPLACEMENT  ).
   Fig 1: Measuring Resistance Between Terminals No. 3 And No. 4

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Measure the resistance between terminals No. 3 and No. 4 in each switch position according to the table.
   HFL SWITCH
   
   

   Position	Resistance
   No button pressed	About 1 kΩ
   HFL TALK button pressed	About 185 Ω
   HFL BACK button pressed	About 45 Ω

3. If the resistance is not as specified, replace the HFL switch (see HFL SWITCH REPLACEMENT  ).