LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2012 >> Insight Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Audio System) >> System Description >> Audio Unit Connector for Inputs and Outputs >> Audio-Navigation Unit Connector E (14P)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Audio-Navigation Unit Connector E (14P)

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Audio-Navigation Unit E (14P) Connector Terminals
G06431787Courtesy of AMERICAN HONDA MOTOR CO., INC.
TERMINAL NAME REFERENCE CHART

Cavity Wire Color Terminal Name Connect to
E1 ORN + B USB adapter unit
E2 BLU SYS ON USB adapter unit
E3 GRY(1) GA-NET BUS SH Shield for terminals No. 9 and No. 10
E4 GRY(1) AUDIO SH Shield for terminals No. 5, No. 6, No. 13 and No. 14
E5 BLK AUDIO R+ USB adapter unit
E6 WHT AUDIO L+ USB adapter unit
E9 YEL GA-NET BUS+ USB adapter unit
E10 BRN GA-NET BUS- USB adapter unit
E11 BLK GND USB adapter unit
E13 RED AUDIO R- USB adapter unit
E14 GRN GAUDIO L- USB adapter unit
(1) The shielded wires have a heat-shrunk tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.