LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2012 >> Insight LX >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Audio System >> System Description >> USB Adapter Control Unit Connector for Inputs and Outputs >> USB Adapter Control Unit Connector A (14P)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

USB Adapter Control Unit Connector A (14P)

Fig 1: Identifying USB Adapter Control Unit Connector A (14P)
G08094902Courtesy of AMERICAN HONDA MOTOR CO., INC.
Cavity Wire Color Terminal Name Description
A1 ORN + B Continuous power source for USB adapter control unit
A2 BLU SYS ON Inputs signal for USB adapter control unit switching ON/OFF
A3 GRY(1) GA-NET BUS SH Shield for terminals No. 9 and No. 10
A4 GRY(1) AUDIO SH Shield for terminals No. 5, No. 6, No. 13, and No. 14
A5 BLK AUDIO R + Outputs sound signal
A6 WHT AUDIO L+ Outputs sound signal
A9 YEL GA-NET BUS + GA-Net bus communication signal
A10 BRN GA-NET BUS- GA-Net bus communication signal
A11 BLK GND Ground for USB adapter control unit
A13 RED AUDIO R- Outputs sound signal
A14 GRN AUDIO L- Outputs sound signal
(1) The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.
scientia non olet · About LEMON Manuals