LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2012 >> Odyssey EX-L >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> HANDSFREELINK System >> System Description >> HandsFreeLink Control Unit Inputs and Outputs >> HANDSFREELINK Control Unit 32P Connector
April 5, 2026: LEMON Manuals is launched! Read the announcement.

HANDSFREELINK Control Unit 32P Connector

Fig 1: Identifying Handsfreelink Control Unit 32P Connector Terminals
G06971269Courtesy of AMERICAN HONDA MOTOR CO., INC.

HandsFreeLink Control Unit 32P Connector 

HANDSFREELINK CONTROL UNIT 32P CONNECTOR TERMINAL DESCRIPTION CHART

Cavity Wire Color Terminal Name Description
1 BLU MIC- Inputs microphone signal negative
2 PNK MIC+ Inputs microphone signal positive
3 GRY(1) MIC SH Shield for terminals No. 1 and No. 2
4 BRN TELM SIG + Outputs telephone sound signal to audio-navigation unit(2) or audio unit(3)
5 PUR GA AUDIO L+ Outputs sound signal
6 ORN GA AUDIO R+ Outputs sound signal
7 Not used Not used --
8 Not used Not used --
9 Not used Not used --
10 Not used Not used --
11 Not used Not used --
12 YEL GA BUS- GA-Net bus communication signal
13 BRN GA BUS+ GA-Net bus communication signal
14 LT BLU HFL MUTE HFL mute signal
15 LT GRN HFL STRG SW Detects control signal from HFL switch
16 BLK GND Body ground to G501
17(2) RED HFL-NAVI MIC- Outputs microphone signal negative
18(2) GRN HFL-NAVI MIC+ Outputs microphone signal positive
19 GRY(1) TELM SIG SH Shield for terminals No. 4 arid No. 20
20 YEL TELM SIG- Outputs telephone sound signal to audio-navigation unit(2) or audio unit(3)
21 BLU GA AUDIO L- Outputs sound signal
22 YEL GA AUDIO R- Outputs sound signal
23 Not used Not used --
24 Not used Not used --
25 Not used Not used --
26 Not used Not used --
27 Not used Not used --
28 Not used Not used --
29 Not used Not used --
30 Not used Not used --
31 PUR ACC Power source for accessories
32 ORN +B Continuous power source
(1) The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray may not match the color of the wire shown on the circuit diagram.
(2) With navigation
(3) Without navigation