Back Power Window Switch Test/Replacement

Remove the driver's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
Remove the three mounting screws, then remove the back power window switch (A) from the switch panel (B).

Fig 1: Identifying Back Power Window Switch And Switch Panel With Mounting Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Swap the back power window switch with another known-good switch and test. If the original back power window switch is faulty; replace it.
Install the switch in the reverse order of removal.
Reset the power window control unit (see RESETTING THE POWER WINDOW CONTROL UNIT ).