PCM A/T Control System Inputs and Outputs at PCM Connector C ◦ (49P)
CONNECTOR TERMINALS REFERENCE CHART
| Terminal number | Wire color | Terminal name | Description | Signal |
|---|---|---|---|---|
| 10 | BLK/RED *(1) TAN *(2) |
IG1 (IGNITION SIGNAL) | Detects ignition signal | With ignition switch ON (II): battery voltage |
| 13 | YEL/RED *(1) PNK *(2) |
VCC1 (SENSOR VOLTAGE) | Provides sensor reference voltage | With ignition switch ON (II): about 5.0 V |
| 14 | GRN/WHT *(1) BLU *(2) |
SG1 (SENSOR GROUND) | Sensor ground | Less than 0.2 V at all times |
| 44 | BRN/YEL *(1) BRN *(2) |
LG1 (LOGIC GROUND) | Ground circuit for PCM | Less than 0.2 V at all times |
| 48 | BRN/YEL *(1) BRN *(2) |
LG2 (LOGIC GROUND) | Ground circuit for PCM | Less than 0.2 V at all times |
| *(1): Refers to 2009-10 Models *(2): Refers to 2011-12 Model |
||||