Audio-Navigation Unit Connector H (8P)

Fig 1: Identifying Audio-Navigation Unit Connector H (8P) Terminals

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Cavity

Wire Color

Terminal Name

Description

Voltage (about)

Symptom

GRN

C-SIG1

Outputs vertical/horizontal synchronizing signal

In RGB color diagnostic mode: 0.3 V average

If open/short to ground: Picture rolls horizontally, colors still visible.

RED

G-SIG

Outputs green color signal

In RGB color diagnostic mode: 0.7 V average

If open/short to ground: Green color missing (see RGB Color )

BLK

SIG GND

Ground for color signal

0 V

If open: No change to display.
If short to ground: No effect on system.

GRY⁽¹⁾

SIG SH

shield for terminals No. 2, No. 3, No. 4, No. 7 and No. 8

YEL

B-SIG

Outputs blue color signal

In RGB color diagnostic mode: 0.7 V average

If open/short to ground: Blue color missing (see RGB Color )

WHT

R-SIG

Outputs red color signal

In RGB color diagnostic mode: 0.7 V average

If open/short to ground: Red color missing (see RGB Color )

⁽¹⁾	The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.