DTC B1002: MICU Internal Error (EEPROM Error)

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If you are troubleshooting multiple DTCs, be sure to follow instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).

Clear the DTCs with the HDS.
Turn the ignition switch to LOCK (0) and then back to ON (II).
Wait for 6 seconds or more.
Check for DTCs with the HDS.

Is DTC B1002 indicated?

YES - Faulty MICU, replace the under-dash fuse/relay box (see REMOVAL AND INSTALLATION ). ■

NO - Intermittent failure, the system is OK at this time. ■