LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2015 >> Pilot SE, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Electronic Throttle Control System) >> Accelerator Pedal Module Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Accelerator Pedal Module Removal/Installation

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the APP sensor 6P connector (A).
    2. Fig 1: APP Sensor 6P Connector & Accelerator Pedal Module Nuts With Torque Specifications
    G05961335Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the accelerator pedal module (B).
    NOTE: The APP sensor is not available separately. Do not disassemble the accelerator pedal module.
  3. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals