| The mode changes between ACCESSORY mode and ON mode, but it does not change to OFF (LOCK) mode |
- Check the keyless access control unit
- Check the park pin switch
- Check the transmission range switch
- Check clutch pedal position switch
|
- Keyless access control unit
- ATP-P line open
- Transmission range switch
- Park pin switch
- P-PIN SW line open
- Clutch pedal position switch
|
| The mode changes between ACCESSORY mode and ON mode, but it is difficult to change to OFF (LOCK) mode |
- Check the keyless access control unit
- Check the gauge control module
- Check the park pin switch
- Check clutch pedal position switch
|
- Gauge control module
- Keyless access control unit
- PCM
- B-CAN communication line open/short
- F-CAN communication line open/short
- Speed signal line open
- Park pin switch
- P-PIN SW line open
- Clutch pedal position switch
|
| Engine start/stop switch does not work |
Check for DTCs. If any DTC is indicated, go to the DTC troubleshooting |
- Accessory relay
- Keyless access control unit
- Engine start/stop switch
- SS1 (+) line short
- SS2 (-) line short
- Harness
|
| Engine does not crank (power supply is normal) |
- Check the keyless access control unit
- Check the brake pedal position switch
|
- Keyless access control unit
- STS line open/short
- Brake pedal position switch
- STOP LT line open/short
|
| The engine starts, but stalls immediately |
The engine starts but stalls immediately |
- No power to PCM
- No power to MICU
- S-NET line open/short
- ESL SW B line open*
- Electric steering lock*
- Harness/fuses
|
| Keyless access indicator does not go off or does not come on |
Keyless access indicator does not go off or does not come on |
- Gauge control module
- Keyless access control unit
- KEY SW line open
- Harness
|
| Immobilizer indicator does not go off or does not come on |
Immobilizer indicator does not go off or does not come on |
- Gauge control module
- Keyless access control unit
- PCM
|